When it comes to vertical down welding, both 8010G and 8010 pipeliner or 8010-P1 are the suitable welding rod available in the market. For welding on pipelines, 8010G and 8010-P1 welding rods are widely used. Hence, people always get confused to choose the best one for their job.
In this article, the 8010-P1 welding rod has been compared with the 8010G in detail. Please, go through the article to clear your confusion and select the most suitable welding rod for your application.
Table of Contents
8010-P1 welding rod
8010-P1 is a cellulose-based welding rod primarily used for welding on vertical surfaces. In the 8010-P1 welding rod, the P1 indicates the suitability for pipeline steel welding.
8010G welding rod
8010G is also a cellulose-coated welding rod that allows welders to perform vertical down or vertical up welding. In the 8010G welding rod, the G indicates the general classification of this type.
Similarities between 8010G vs 8010-P1 welding rod
Both 8010G and 8010-P1 electrodes are coated with at least 30% cellulose, an organic material. Due to cellulose, a good amount of metal is melted and a deep penetration profile is obtained.
Differences between 8010G vs 8010-P1 welding rod
The difference between 8010G and 8010-P1 electrodes is very minor. Both 8010G and 8010-P1 electrodes offer almost the same properties.
The main difference between them is- in 8010G, “G” stands for general type classification and in 8010-P1, “P1” stands for pipeline steel welding.
8010G vs 8010-P1 welding rod: Which one should you choose?
Vertical welding is a complex type of welding as the molten metal pool tends to move downwards due to gravity. To perform this type of welding, a welding rod with the capability to freeze quickly is required.
8010G and 8010-P1 welding rods are the two cellulose-based electrodes and can be used for welding in all positions. Especially, they exhibit supreme properties for vertical down or up welding.
8010G welding rod is a general type electrode of 80 series and suitable for all types of vertical welding. 8010-P1 welding rod is also an electrode of 80 series and is specifically made for pipeline welding on steel. So, for pipeline steel welding, 8010-P1 is the best choice.
The 8010 welding rod is of DCEP (Direct Current Electrode Positive) polarity. It means, the welding rod is connected at the positive end and the base plate is connected at the negative end.
8010g welding rod is an 80 series electrode having a tensile strength of 80 ksi. Is mostly used for high-strength welding and vertical welding.
To perform welding vertically upward or downward, electrodes with special properties are required. 8010G and 8010-P1 fulfill the requirements and offer the most suitability for this application. 8010-P1 exhibits special compatibility for pipeline steel welding.