Willing to get the ESAB Rebel EMP 215ic welder for your next welding project? Undoubtedly, EMP 215ic is a good welder, but it’s quite expensive too.
So if you are inspired by its unique features, now it’s time to check some ESAB Rebel EMP 215ic problems. And then you can make an informed decision to make the buy worthwhile.
Table of Contents
The ESAB Rebel EMP 215ic-Overview
The Esab Rebel EMP 215IC is the perfect welding machine for joining metallic parts. It’s a multiprocessing welding machine that welds with MIG. The machine also includes stick, TIG, and flux cores, distinguishing it from other welding machines on the market.
This Esab Rebel EMP 215IC comes in a yellow colour and is portable to carry side to side. With roll cage features and five handles, this welding machine will let you transport it. Another handy feature is the IP23S rating.
It means the operator won’t experience any disturbance running this welding machine in bad weather conditions. You can run this multifunctional welding machine through a 120V or 230V power supply and connect it to the generator.
In short, if you need a high-level and professional welding machine for your project or any demanding DIY applications, use this Esab Rebel.
ESAB Rebel EMP 215ic problems
The ESAB Rebel EMP 215ic is not a perfect welding machine in every way, and it has some limitations. A few enthusiasts also don’t like its features either. In the next section, we will discuss some ESAB Rebel EMP 215ic problems that you should consider to make your buy worthwhile.
Doesn’t Support AC Output
This ESAB Rebel EMP 215ic won’t be the right choice for you if you need AC TIG output. Though most welders prefer DC TIG for stainless steel and mild steel welding, AC TIG offers better production.
Despite this, AC TIG output is a must for TIG welding aluminum. So if you need to handle this job, 215iC won’t be a deal-breaker.
Low Duty Cycle on High Output
Another common problem that welders face using an ESAB Rebel EMP 215ic is producing a low duty cycle on high output. This means that while doing MIG welds at 240A, this welding machine will only give you a 10% duty cycle, translating 1 minute of welding per ten minutes.
But, you will get a better experience by lowering the amperage. At 200A output, this welding machine will let you weld for around 3 minutes continuously. Still, the run time is slower than other standard welding machines.
So, if you need a unit to perform heavy welds for an extended period, pass on the ESAB Rebel EMP 215ic. There are lots of cheap welders that deliver a 60% duty cycle at 200A. But they can’t beat the arc quality; build quality and adjustability of the EMP 215ic.
Another limitation of this welder is that it has a more complex internal system. So this EMP 215ic doesn’t cool down.
Truthfully, if this EMP 215ic had a better duty cycle, it would cost twice as much. The warranty of this welder is also three years, and heat is the common reason that breaks inverter welders. Thus, a lower duty cycle is expected from this welder unit.
Don’t include all the accessories
This Rebel 215ic doesn’t come with a spool gun and a TIG foot pedal. So if you want full experience or MIG welding aluminum, you have to buy those accessories. But, you can handle typical welding tasks without spending extra bucks on those accessories.
Apart from these, you may need to buy a U-grooved feed roller, a low-friction PTFE liner, and an outlet tube for aluminum.
This ESAB Rebel EMP 215ic should have a better-looking screen. Though the existing system works well, it is dated. The screen doesn’t look modern and premium. Its icon also seems basic, and the user interface is lacking.
Other minor problems with the ESAB Rebel EMP 215ic
Apart from the problem we discussed above, some users experience a few minor difficulties while using EMP 215ic. These are:
- This welder becomes hot. As a result, if your hands come into contact with this machine or its parts, they may be burned.
- Overvoltage can damage this welder over time. So avoid using a voltage that rises and drops continuously.
- The spark of this welder can cause a fire if you use it in a narrow space.
- Its gun has a plastic connector that can get damaged during TIG welding.
- This welder is overpriced compared to the machine currently available.
Frequently Asked Questions
The ESAB Rebel EMP 215ic is a professional-grade multi-process welder and can handle almost any welding job.
According to the professional welder, this EMP 215ic is one of the finest welders in the current market. With a combination of the best build quality and a fantastic arc, this unit offers unbeatable quality.
This ESAB Rebel EMP 215ic is manufactured in lots of countries around the world, including Europe, Asia, and South and North America. Thus, it’s difficult to say where this EMP 215ic is manufactured from.
Some of the Esab Rebel EMP 215IC problems come from the factory and other may occur due to harsh or wrong use. You can’t solve an issue like a heavyweight and high storage capacity.
But you keep the welder cool avoiding harsh use and remain happy with a lower duty cycle. Apart from these, this Esab Rebel EMP 215IC is a high-end and professional-grade welder and is suitable for versatile use. Hope the guide is enough for you to make a wise decision.