Lincoln Square Wave 200 Pros And Cons

Lincoln Square Wave 200 is a welder from Lincoln Electric that many people want for its outstanding performance. Like buying other tools, you must know Lincoln Square Wave 200 pros and cons.

 The device is good at welding aluminum, steel, and chrome-moly with high precision and a nice bead look. It has everything you need to start welding, which means it will work well. 

Apart from this usefulness, it has some drawbacks too. In this article, we will discuss them thoroughly.

Lincoln Square Wave 200 Pros And Cons

Lincoln Square Wave 200 Pros

Lincoln Square Wave 200 is meant for professionals, hobbyists, and small fabricators. It is small and can be taken with you. The welder is meant to help you improve your welding skills by taking advantage of the Square Wave 200’s extra features. Here are some notable Pros of this machine, 

High Power of Dual Voltage

A dual voltage welder lets you choose whether you want to use 120V or 230V when you need more power. The two power cords for each voltage make it quick and easy to switch between them.

An easy-to-use interface

Most welding machines have complicated controls that make it hard for people to figure out how to set them up. 

But with the Lincoln Square Wave 200 welder, even a novice can figure out how to use it in just a few seconds. 

There is an on/off switch, a button to change the pulse and AC frequency, and a button to balance the AC. There is also a big knob that you can turn from the button above. Another switch lets you choose which welding process you want to use (DC/AC TIG and Stick), too.

High Frequency AC

When you use the welder, you can choose an AC frequency range from 60 Hz to 150 Hz. 

When you use the lower number, you will get a wider beam of light. When you use the higher number, you want a narrow and focused beam.

The Pulse Mode

This mode lets you use a pulsed current instead of a steady one, which makes it easier and faster to weld. Higher AC frequency, on the other hand, makes it easier to control when thin materials are welded.

Portability

It is very easy to move because it only weighs 46 lb. The only thing that needs to be done is to make sure there is an outlet where you can start welding. It can also be used in small places.

Can work on multiple projects at the same time

You can use a TIG weld if you need a precise bead look. It can also work on things that are thicker than aluminum. Stick welding is also there, which gives you more options.

Additional items:

These are in the form of a Torch Ready-Pak, a ground clamp, input cords for 120V and 230V, a Gas Regulator, and a Stick Electrode Holder, among other things.

Lincoln Square Wave 200 Cons

Though being a wonderfully useful welder machine, there are still some weak points that can discourage you to buy it. However, these cons are really minimal.

The ground clamp is not long enough.

For modest projects, the ground clamp’s height is sufficient; however, for larger projects, it is necessary to purchase an additional ground clamp.

There is no change in the time on pulse or amperage.

Although this machine has the capability of personalizing the number of pulses per second, the time between pulses and the background amperage cannot be altered.

Costly

Although the welder is a little on the expensive side, it is a good value for money.

FAQs about Lincoln Square Wave 200 Welder

What Is The Maximum Thickness Of Steel Lincoln Square Wave 200 Can Weld ?

If you want to weld aluminum or steel, the Lincoln Square Wave 200 can weld them up to 3/16′′ and 3/8′′ wide.

Can It Be Used Without Foot Pedal?

Yes, It does not need a foot pedal for welding.

What Are The Main Uses Of Lincoln Square Wave 200 Welder?

Lincoln Square Wave 200 is a welder that can be used at home, in the shop, for light fabrication, in motorsports, for education, and more. 

In the chemical, food, and other industries, stainless steel parts and accessories need to be weld together. The machine that can be used for clean and sanitary welding is better for this. There are many different types of metal that can be welded with.

I Can Use Lincoln Square Wave 200 Welder To Weld What Types Of Metal?

Most of the time, you can use your Lincoln Square Wave 200 welder to weld steel, stainless steel, aluminum, and other metals, like chromium-molybdenum steel alloys, with it.

Can I Use The Welder Outside?

No, Lincoln Square Wave 200 can only be used indoors, and it can’t be used outside.
There is turbulence in the surrounding air, which interferes with the shielding gas and causes poor welding results. 

For indoor or workshop use, the machine can TIG weld, while for outdoor use or thicker materials, the machine can stick weld.

Is The Lincoln Square Wave 200 A Multi-Process Welder Or Is It Exclusively A TIG Welder?

The Lincoln Square Wave 200 welder is a TIG welder with the added capability of stick welding for outdoor work or thicker materials.

In general, multi-process welders excel at one primary welding process (TIG in our case), followed by a secondary welding process with fewer features. 
However, the multi-process welder will never be as reliable as dedicated secondary welding machines.

Final Thoughts

Lincoln Square Wave 200 is a great machine for anyone who wants to learn how to weld or work on a small project. However, for bigger projects, you’ll need to use another clamp.

The machine is also very easy to move because it doesn’t have a lot of weight. This means that it can be taken anywhere with a lot of ease and comfort. It costs a little more than other machines, but it is worth the money. 

That’s why this welding machine should be used. It should last a long time because it’s made to do that job well.

Leave a Comment