lincoln electric cross country 300 reviews
The demand for pipe welding has kept increasing worldwide for some time. And it takes professionals explicitly to achieve the perfect result.
Complexity in pipe welding often leads to mistakes and errors, even by experts. What everyone need is a subtle welder to obtain the proper arc first.
And Lincoln stands to outrun other mid-class options with its exclusive pipe welder. The designed device is ready to nail your cross-country welding.
Many technical features and associated details are there to understand. You can’t go for any expensive purchase like this without an explanation.
No need to waste your time on fancy and misleading online ads. We’ve prepared Lincoln Cross Country 300 reviews with everything necessary.
- Professional tuning to deliver optimum pipe welding precision.
- Built-in generator to power up grinders, pumps, and travel trailers.
- Dual control system with a simplified personalization interface.
- Standard block heater to allow operation in cold environments.
- A sliding door on either side to enable easy access to interiors.
- Small footprint to save space inside the truck or in workplaces.
Getting the perfect arc for your cross-country welding business is no longer a myth. The engine-driven welder combines superior quality, high reliability, and excellent portability. Nonetheless, Lincoln has more to offer with the purpose-built welding machine.
The welder is flexible enough to let you achieve the pipe welding requirements. Also, the featured DC Stick, MIG, Flux-Cored, and TIG modes support Lincoln Electric wire feeders. So, you can perform cross-country pipes, process piping, pipe repairs, and maintenance jobs.
Also, the tuned stick arc incorporates excellent outcomes for root, fill, and cap passes. Its full designation is even suitable for cellulosic or low hydrogen stick electrodes. Fewer mode controls improve simplicity while letting you enjoy accessible maintenance with ease.
However, there are 4 different models available under the Lincoln 300 lineup. Both are almost identical based on technical details, except for the included remote control. You can purchase Lincoln Cross Country 300 with or without a wireless/wired remote control.
A built-in Kubota® V1505(6) engine holds 2HP @ 1800 RPM 91in3 (1.5L) rating. You’ll have 300A/32V at 100% duty cycle for the rated 40A-300A DC output. Meanwhile, the engine can deliver 250A/30V at 100% duty cycle for the 20A-250A DC Touch Start TIG.
The 3-phase KVA receptacle of 27A @ 240V can deliver continuously 11,000W against a 12,500W peak. But the 1-phase 42A @ 240V receptacle provides a 11,500W peak against 10,000W continuous power. The rated CV output counts 300A/32V/100% or 350A/28V/100% with the 14V – 32V single-dial control.
The fully assembled device measures 31.9” x 25.3” x 56.0” to weight nearly 1034lbs/469kg. Its coated steel enclosure is ready to stand up to your frequent cross-country travel. Even the convenient location of the battery jumper studs allows fast, simple, instant inspection.
Pros and Cons
Remote Control Options for Lincoln 300
There are 4 models under Cross Country 300, primarily focused on the included remote control type. The basic ones feature no remote control whatsoever. But the remaining 3 models come with the control as an accessory. You can start and even change settings from a distance.
However, there are two remote controls you can choose for the welder –
Wired Remote Control – The length measures 125’ or 38.1m. It includes control box + cable + a 6-pin MS-Type connector.
Wired Remote Control – The 125’ cord has a 115V AC Auxiliary Power. It also includes control box + cable + a 6-pin MS-Type connector.
Frequently Asked Questions (FAQs)
Answer: No, it has DC welding output only.
Answer: No, it has DC welding output only.
Answer: Single-phase power requires a 50Hz/60Hz frequency.
Answer: The capacity may distort by ±10%.
Answer: 1890RPM for high idle and 1350RM for low idle.
Answer: Yes, you can set it between 14V – 32V.
Overcoming all the errors in pipe welding is almost impossible with the complexity. But you can’t afford to deliver a compromised outcome by any means.
Having the perfect arc is one of the first essential facts to minimize the margin of error.
And that’s where you should focus on getting a suitable pipe welder. Our info on Lincoln Cross Country 300 reviews can help you decide on the right purchase.
Read More: MIG Welder Wire Feed Motor Not Working: Which Steps You Can Take!